| Author |
Message |
|
Deathstorm
|
Post subject: Front Audio problem  Posted: Fri Aug 04, 2006 8:38 pm |
|
|
|
|
My motherboard has an Audio Front Connector, on my front panel theres a socket for a mic and headphones. The the wires to connect to the motherboard for the front audio on the other hand are shown as:
ground
mic-in
r-out
r-ret
l-out
mic-power
L-ret
But on my motherboard, the sockets are called:
Port 1L
GND
PORT 1R
PRESENCE#
PORT 2R
SENSE1_RETURN
SENSE_SEND
PORT 2L
SENSE2_RETURN
Is it possible to hook up the front audio and if so, which ones do I connect to?
|
|
  |
|
 |
|
FoRcEFiRe
|
Post subject: Posted: Fri Aug 04, 2006 9:54 pm |
|
 |
| Great balls of fire |
 |
Joined: Mon Mar 21, 2005 2:12 am
Posts: 756
Location: In the disco inferno
|
|
what motherboard do you have?
|
|
| |
|
|
|
Deathstorm
|
Post subject: Posted: Fri Aug 04, 2006 10:38 pm |
|
|
|
|
| |
|
|
|
FoRcEFiRe
|
Post subject: Posted: Fri Aug 04, 2006 11:20 pm |
|
|
| Great balls of fire |
|
Joined: Mon Mar 21, 2005 2:12 am
Posts: 756
Location: In the disco inferno
|
|
PIN SIGNAL DESCRIPTION
1 PORT 1L Analog Port 1 - Left channel
2 GND Ground
3 PORT 1R Analog Port 1 - Right channel
4 PRESENCE# Active low signal - signals BIOS that a High Definition Audio
dongle is connected to the analog header. PRESENCE# = 0
when a High Definition Audio dongle is connected.
5 PORT 2R Analog Port 2 - Right channel
6 SENSE1_RETIRN Jack detection return from front panel JACK1
7 SENSE_SEND Jack detection sense line from the High Definition Audio CODEC
jack detection resistor network
8 KEY Connector Key
9 PORT 2L Analog Port 2 - Left channel
10 SENSE2_RETIRN Jack detection return from front panel JACK2
that should help u
|
|
| |
|
|
|
FoRcEFiRe
|
Post subject: Posted: Fri Aug 04, 2006 11:24 pm |
|
|
| Great balls of fire |
|
Joined: Mon Mar 21, 2005 2:12 am
Posts: 756
Location: In the disco inferno
|
|
you might be able to hack it together but i think ull find ur case was made b4 the board, therefore it uses and older system
|
|
| |
|
|
|
elbow=GCHQ=
|
Post subject: Posted: Fri Aug 04, 2006 11:30 pm |
|
|
| Comin' outta Gallifrey |
 |
Joined: Mon Aug 01, 2005 9:44 pm
Posts: 7821
Location: banging with enamor
|
|
i've got the other problem - my sound card has big holes but my case has small pegs
get an audigy 2 zs or earlier, and they'll fit fine in that
_________________
“There are some people in this world who don’t love their fellow man, and I HATE people like that!”
|
|
| |
|
|
|
Deathstorm
|
Post subject: Posted: Sat Aug 05, 2006 12:17 am |
|
|
|
|
I got it to work but the sound is pretty bad, even on the rear audio. It stops when I take the front connectors out.
|
|
| |
|
|
|
